Communication software: HD133Ctrl (STC-HD93DV / STC-HD93SDI, STC-HD133DV / STC-HD133SDI)
                                      JTACtrl (STC-HD203DV / STC-HD203SDI)
 
Please download the software from DVI/SDI Software download

Install driver for communication JIG
When connecting communication JIG (JIG-USB-HD) to PC first time, it is necessary to install “USB virtual serial driver” for communication manually.
Please install “USB virtual serial driver” with “dpinst_xxx” in below location.
   “Sentech\HD133Ctrl\drv” for HD133Ctrl software
   “Sentech\JTACtrl\drv” for JTACtrl software
* Please disconnect JIG-USB-HD after “USB virtual serial port” installation is completed.
 
“Sentech USB Serial Port driver” installs automatically when JIG-USB-HD is re-connecting after install “USB virtual serial driver”.
Please check the “COM Port number” for “Sentech USB Serial Port” at Device manager.
 
Please setup the communication port at “Port Setting” under “Comm” in the menu of communication software.
Please select “COM Port number” that confirmed at Device manager.
 
Please check the error information in the specifications if error message appears while communicating to the camera.