STC-MBS43CXP3

Back to the list of
CoaXPress Model>>

STC-MBS43CXP3 Isometric drawing

Specification sheet

Spec. Model No. STC-MBS43CXP3
Resolution 0.4M
Effective Pixels 720 (H) x 540 (V)
Monochrome/Color Monochrome
Frame rate (8bits) 523 fps
Interface CoaXPress (CXP-3, 1 lane)
Protocol CoaXPress Standard Version 1.1.1
Power supply PoCXP
Power Consumption Less than 3.0 W
Operational Temperature Up to +45 deg. C
(Environment temperature)
Image Sensor Image Sensor SONY IMX287
Shutter type Global shutter
Optical Size 1/2.9”
Cell Size 6.90 (H) x 6.90 (V) µm
Mechanical Spec. Dimensions 28 (W) x 28 (H) x 40 (D) mm
Weight Approximately 52 g
Lens mount C mount
Optical filter No optical filter
Interface connector BNC (75 ohm) x 1
Power/Signal connector HR10A-7R-6PB (Hirose) or equivalent x 1
Functions Scanning mode Full scanning / ROI
Operational mode Edge preset trigger / Pulse width trigger / CXP_Packet trigger / Free-run
Image pixel format Mono8 / Mono10 / Mono12
Exposure time 1 µsecond to 16.777 seconds
Gain (Analog) 0 to 42 dB (Image sensor gain incluidng digital)
Gain (Digital) x1 to x7
Gamma N/A
Binning N/A
Decimation N/A
Image flip Vertical flip / Horizontal flip /
Vertical and horizontal flip / Off
Defective pixel correction Up to 512 pixels
Save user settings Support (Eight settings)
White balance N/A
FFC function N/A
Auto control functions N/A
Chunk function N/A
Event function N/A
PTP function (IEEE1588) N/A

Dimensions Drawings

STC-MBS43CXP3 Dimensions Drawings

Spectrographic Drawings

STC-MBS43CXP3 Spectrographic Drawings
Contact us

Please call us if you are in a hurry.

046-236-6660

Choosing a Camera
  • Software Downloads
  • Document Downloads
  • FAQ
pagetop