STC-HD213SDI
Back to the list of
SDI Model>>
Specification sheet
| Spec. | Model No. | STC-HD213SDI |
|---|---|---|
| Resolution | 1080P | |
| Effective Pixels | 1,920 (H) x 1,080 (V) | |
| Monochrome/Color | Color | |
| Frame Rate (8bits) | 60 fps | |
| Interface | 3G-SDI 4:2:2 YCrCb 10bits | |
| Protocol | 3G-SDI (Physical layer: SMPTE 424M, Data mapping: SMPTE 425M Level-A) | |
| Power supply | External power (+9 to +15 Vdc) | |
| Power Consumption | Less than 3.3 W | |
| Operational Temperature | Up to +43 deg. C (Environmental temperature) |
|
| Image Sensor | Image Sensor | SONY IMX291 |
| Shutter type | Rolling shutter | |
| Optical Size | 1/2.8" | |
| Cell Size | 2.9 (H) x 2.9 (V) µm | |
| Mechanical Spec. | Dimensions | 40 (W) x 40 (H) x 48.9 (D) mm |
| Weight | Approximately 138 g | |
| Lens mount | C mount | |
| Optical filter | IR cut filter on it | |
| Interface connector | BNC x 1 | |
| Power/Signal connector | Power: DC power jack (PC721A) x 1 Communication/control: 3.5mm stereo jack x 1 |
| Functions | Scanning mode | 1080P60 / 1080P59.94 / 1080P50 / 1080P30 / 1080P29.97 / 1080P25 1080i60 / 1080i59.94 / 1080i50 / 720P60 / 720P59.94 / 720P50 |
|---|---|---|
| Operational mode | Free-run | |
| Image pixel format | RGB8bit | |
| Exposure time | 29.6 µseconds to 2.12 seconds | |
| Gain (Analog) | 0 to 45 dB (includes digital gain) | |
| Gain (Digital) | ||
| Gamma | Manual / 0.3 / 0.45 / 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0 |
|
| Binning | N/A | |
| Decimation | N/A | |
| Image flip | Vertical flip / Horizontal flip / Vertical and horizontal flip / Off | |
| Defective pixel correction | Up to 256 pixels | |
| Save user settings | Support | |
| White balance | Auto / Manual / push to set white balance | |
| FFC function | N/A | |
| Auto control functions | Auto exposure / Auto gain / Auto white balance | |
| Chunk function | N/A | |
| Event function | N/A | |
| PTP function (IEEE1588) | N/A |
Dimensions Drawings
Spectrographic Drawings
