Back to the list of
UVC compatible USB3.0 model>>
Spec. | Model No. | STC-S133UVC-DBLL |
---|---|---|
Resolution | 1.3M | |
Effective Pixels | 1,280 (H) x 720 (V) | |
Monochrome/Color | Color | |
Frame rate (8bits) | 60 fps | |
Interface | USB3.0 | |
Protocol | UVC 1.1 | |
Power supply | USB bus power (+5 V) | |
Power Consumption | Less than 0.8 W | |
Operational Temperature | Up to +55 deg. C (Environment temperature) |
|
Image Sensor | Image Sensor | SONY ISX017 |
Shutter type | Rolling shutter | |
Optical Size | 1/3.2" | |
Cell Size | 3.5 (H) x 3.5 (V) µm | |
Mechanical Spec. | Dimensions | 25 (W) x 22 (H) x 24.5 (D) mm |
Weight | Approximately 13 g | |
Lens mount | S mount | |
Optical filter | Dual pass filter on it | |
Interface connector | USB3.0 micro B x 1 | |
Power/Signal connector | N/A |
Functions | Scanning mode | Full scanning (1,280x720) / ROI (1,280x960 / 800x800 / 640x480) |
---|---|---|
Operational mode | Free-run | |
Image pixel format | 8bits | |
Exposure time | 1.65 µseconds to 33.333 mseconds | |
Gain (Analog) | 0 to 40 dB | |
Gain (Digital) | x1 to x4 | |
Gamma | Off / Gamma table | |
Binning | N/A | |
Decimation | N/A | |
Image flip | Vertical flip / Horizontal flip / Vertical and horizontal flip / Off |
|
Defective pixel correction | Support | |
Save user settings | Support (One setting) | |
White balance | Auto / Manual / Push to set white balance | |
FFC function | Support | |
Auto control functions | Auto exposure / Auto gain / Auto white balance | |
Chunk function | N/A | |
Event function | N/A | |
PTP function (IEEE1588) | N/A |