The STC-HD93DV/SDI and STC-HD133DV/SDI are equipped with a left/right image flip function, while the STC-HD203DV/SDI, STC-HD213DV/SDI, and STC-HD213DVN/SDIN are equipped with vertical image flip, horizontal image flip, and both vertical and horizontal image flip functions.

The image flip function can be set either through the OSD or by using the communication software (HD133Ctrl, JTACtrl, JTBCtrl).

STC-HD93DV/SDI, STC-HD133DV/SDI

Procedure for Configuration through the OSD

1. Connect the controller to the camera, and then select “MEMU.”
2. On OSD PAGE1, when “ON” is selected under “MIRROR”, the displayed image will be flipped horizontally.

Procedure for Configuration through the Communication Software

1. Connect the JIG-USB-HD to the camera, and then start HD133Ctrl.
2. Select “Read ALL”.
3. Select the “DSP:Other” tab.
4. When “ON” is selected under “Horizontal Flip”, the displayed image will be flipped horizontally.

STC-HD203DV/SDI

Procedure for Configuration through the OSD

1. Connect the controller to the camera, and then select “MEMU.”
2. In OSD PAGE5, select one of the following under “IMAGE OUTPUT” according to your application: “STANDARD,” “HV INVERSION,” “V INVERSION,” or “H INVERSION.”

“STANDARD”: Displays the image normally.
“HV INVERSION”: Inverts the image both vertically and horizontally.
“V INVERSION”: Inverts the image vertically.
“H INVERSION”: Inverts the image horizontally.

Procedure for Configuration through the Communication Software

1. Connect the JIG-USB-HD to the camera, and then start JTACtrl.
2. Select “Read ALL”.
3. Select the “DSP:Other” tab.
4. When “H Flip”, “V Flip”, or “HV Flip” is selected under “Image Flip”, the displayed image will be flipped horizontally, vertically, or both.

STC-HD213DV/SDI, STC-HD213DVN/SDIN

Procedure for Configuration through the OSD

1. Connect the controller to the camera, and then select “MEMU.”
2. In OSD PAGE5, select one of the following under “IMAGE OUTPUT” according to your application: “STANDARD,” “HV INVERSION,” “V INVERSION,” or “H INVERSION.”

“STANDARD”: Displays the image normally.
“HV INVERSION”: Inverts the image both vertically and horizontally.
“V INVERSION”: Inverts the image vertically.
“H INVERSION”: Inverts the image horizontally.

Procedure for Configuration through the Communication Software

1. Connect the JIG-USB-HD to the camera, and then start JTBCtrl.
2. Select “Read ALL”.
3. Select the “DSP:Other” tab.
4. When “ON” or “OFF” is selected for Horizontal Flip or Vertical Flip under Image Flip, the displayed image will be flipped horizontally or vertically.
   Note: When both Horizontal Flip and Vertical Flip are set to ON, the image will be flipped both vertically and horizontally (HV flip).