You can save settings to the EEPROM through StCamSWare.
(See [here] for details on how to save settings to the EEPROM with StViewer.)

Saving Settings to EEPROM

1. Start StCamSWare, then go to ‘Options’ -> ‘Settings.’
2. From the Settings window, choose ‘EEPROM’.
3. The following items are available for saving to and loading from the EEPROM:
   Save [Standard]: Saves all information to the camera’s EEPROM except defect pixel position data.
   Save [Defect Pixel Position]: Saves defect pixel position data to the camera’s EEPROM. Use this when new defect pixels have been corrected.
   Load [Standard]: Loads all information from the EEPROM to the camera except defect pixel position data.
   Load [Defect Pixel Position]: Loads defect pixel position data from the EEPROM to the camera.
   Reset Factory Default: Restores initial values to the camera setting file and EEPROM.

At the next startup, the camera automatically loads the settings saved in the EEPROM and operates with them.