Communication Software

For HD93 and HD133 cameras: use HD133Ctrl software.
For HD203 cameras: use JTACtrl software.
For HD213 cameras: use JTBCtrl software.
Please download the software here: [HD133Ctrl Download]
Please download the software here: [JTACtrl / JTBCtrl Download]

How to Install the Communication Jig Driver

If you are connecting the communication jig JIG-USB-HD to a PC for the first time, a USB virtual serial driver is required to enable communication.
Execute “dpinst_xxx” in the folder below to install the driver.
In the case of the communication software (HD133Ctrl), the driver can be found in the Sentech\HD133Ctrl\drv folder.
In the case of the communication software (JTACtrl), the driver can be found in the Sentech\JTACtrl\drv folder.
In the case of the communication software (JTBCtrl), the driver can be found in the Sentech\JTBCtrl\drv folder.

After completing the installation of the USB virtual serial driver,
reconnect the JIG-USB-HD to your PC. The Sentech USB Serial Port driver will be installed automatically.
Please check the COM port number of the USB Serial Port in Device Manager.

Launch the communication software, and set the communication port via Port Setting in the Comm tab.
Select the COM port number of the Sentech USB Serial Port that you confirmed in Device Manager.

When an error code appears during communication, check the error code descriptions in the specifications.