STC-SPC510PCL

Back to the list of
CMOS Model>>

STC-SPC510PCL Isometric drawing

Specification sheet

Spec. Model No. STC-SPC510PCL
Resolution 5.0M
Effective Pixels 2,448 (H) x 2,048 (V)
Monochrome/Color Color
Frame Rate (8bits) 161.9 fps
Interface Camera Link 80bit / Full / Medium / Base
Protocol Camera Link 2.1
Power supply PoCL /
External power (+12 Vdc)
Power Consumption Less than 3.3 W
Operational Temperature Up to +45 deg. C
(Environmental temperature)
Image Sensor Image Sensor SONY IMX250
Shutter type Global shutter
Optical Size 2/3”
Cell Size 3.45 (H) x 3.45 (V) µm
Mechanical Spec. Dimensions 35 (W) x 35 (H) x 40.7 (D) mm
Weight Approximately 71 g
Lens mount C mount
Optical filter No optical filter
Interface connector SDR x 2
Power/Signal connector HR10A-7R-6PB (Hirose) or equivalent x 1
Functions Scanning mode Full scanning / ROI
Operational mode Edge preset trigger / Pulse width trigger /
Free-run
Image pixel format BayerRG8 / BayerRG10 / BayerRG12
Exposure time 1 µsecond to 16.777 seconds
Gain (Analog) 0 to 18 dB
Gain (Digital) x1 to x11.59
Gamma Programmable (32 points table) / Off (1.0)
Binning N/A
Decimation x2 horizontal and vertical simultaneously / Off
Image flip Vertical flip / Horizontal flip /
Vertical and horizontal flip / Off
Defective pixel correction Up to 256 pixels
Save user settings Support
White balance Manual white balance
FFC function N/A
Auto control functions N/A
Chunk function N/A
Event function N/A
PTP function (IEEE1588) N/A

Dimensions Drawings

STC-SPC510PCL Dimensions Drawings

Spectrographic Drawings

STC-SPC510PCL Spectrographic Drawings
Contact us

Please call us if you are in a hurry.

046-236-6660

Choosing a Camera
  • Software Downloads
  • Document Downloads
  • FAQ
pagetop