STC-SPC881PCL
Back to the list of
CMOS Model>>
Specification sheet
| Spec. | Model No. | STC-SPC881PCL |
|---|---|---|
| Resolution | 8.9M | |
| Effective Pixels | 4,096 (H) x 2,160 (V) | |
| Monochrome/Color | Color | |
| Frame Rate (8bits) | 20.6 fps | |
| Interface | Camera Link Base | |
| Protocol | Camera Link 2.1 | |
| Power supply | PoCL / External power (+12 Vdc) |
|
| Power Consumption | Less than 2.8 W | |
| Operational Temperature | Up to +45 deg. C (Environmental temperature) |
|
| Image Sensor | Image Sensor | SONY IMX267 |
| Shutter type | Global shutter | |
| Optical Size | 1” | |
| Cell Size | 3.45 (H) x 3.45 (V) µm | |
| Mechanical Spec. | Dimensions | 35 (W) x 35 (H) x 40.7 (D) mm |
| Weight | Approximately 69 g | |
| Lens mount | C mount | |
| Optical filter | No optical filter | |
| Interface connector | SDR x 1 | |
| Power/Signal connector | HR10A-7R-6PB (Hirose) or equivalent x 1 |
| Functions | Scanning mode | Full scanning / ROI |
|---|---|---|
| Operational mode | Edge preset trigger / Pulse width trigger / Free-run |
|
| Image pixel format | BayerRG8 / BayerRG10 / BayerRG12 | |
| Exposure time | 1 µsecond to 16.777 seconds | |
| Gain (Analog) | 0 to 18 dB | |
| Gain (Digital) | x1 to x11.59 | |
| Gamma | Programmable (32 points table) / Off (1.0) | |
| Binning | N/A | |
| Decimation | x2 horizontal and vertical simultaneously / Off | |
| Image flip | Vertical flip / Horizontal flip / Vertical and horizontal flip / Off |
|
| Defective pixel correction | Up to 256 pixels | |
| Save user settings | Support | |
| White balance | Manual white balance | |
| FFC function | N/A | |
| Auto control functions | N/A | |
| Chunk function | N/A | |
| Event function | N/A | |
| PTP function (IEEE1588) | N/A |
Dimensions Drawings
Spectrographic Drawings
