STC-BBS213POE-BC

Back to the list of
CMOS Board Level Camera>>

STC-BBS213POE-BC Isometric drawing

Specification sheet

Spec. Model No. STC-BBS213POE-BC
Resolution 2.1M
Effective Pixels 1,920 (H) x 1,080 (V)
Monochrome/Color Monochrome
Frame Rate (8bits) 53.0 fps
Interface PoE: IEEE802.3af CLASS2 (1000BASE-T)
Protocol GigE Vision 2.1
Power supply Power Over Ethernet (PoE) (IEEE802.3af)
Power Consumption Less than 4.1 W
Operational Temperature Up to +67 deg. C
(Temperature sensor on camera)
Image Sensor Image Sensor SONY IMX290
Shutter type Rolling shutter / Global reset
Optical Size 1/2.8”
Cell Size 2.9 (H) x 2.9 (V) μm
Mechanical Spec. Dimensions 38 (W) x 38 (H) x 39.7 (D) mm
Weight Approximately 47 g
Lens mount C mount
Optical filter No optical filter
Interface connector RJ45 connector x 1
Power/Signal connector SM06B-SRSS (JST) x 1
Functions Scanning mode Full scanning / ROI
Operational mode Edge preset trigger / Pulse width trigger /
Free-run
Image pixel format Mono8 / Mono10 / Mono12 /
Mono10Packed / Mono12Packed
Exposure time 126 µseconds to 999 mseconds
Gain (Analog) 0 to 25.2 dB
Gain (Digital) x1 to x3
Gamma 0.1 to 4.0
Binning N/A
Decimation N/A
Image flip Vertical flip / Horizontal flip /
Vertical and horizontal flip/ Off
Defective pixel correction Up to 2,048 pixels
Save user settings Support (Eight settings)
White balance N/A
FFC function N/A
Auto control functions Auto exposure / Auto gain
Chunk function Support
Event function Support
PTP function (IEEE1588) Support

Dimensions Drawings

STC-BBS213POE-BC Dimensions Drawings

Spectrographic Drawings

STC-BBS213POE-BC Spectrographic Drawings
Contact us

Please call us if you are in a hurry.

046-236-6660

Choosing a Camera
  • Software Downloads
  • Document Downloads
  • FAQ
pagetop