Back to the list of
CMOS Board Level Camera>>
Spec. | Model No. | STC-BCS213POE-BC-NIR |
---|---|---|
Resolution | 2.1M | |
Effective Pixels | 1,920 (H) x 1,080 (V) | |
Monochrome/Color | Color NIR | |
Frame Rate (8bits) | 53.0 fps | |
Interface | PoE: IEEE802.3af CLASS2 (1000BASE-T) | |
Protocol | GigE Vision 2.1 | |
Power supply | Power Over Ethernet (PoE) (IEEE802.3af) | |
Power Consumption | Less than 4.1 W | |
Operational Temperature | Up to +67 deg. C (Temperature sensor on camera) |
|
Image Sensor | Image Sensor | SONY IMX462 |
Shutter type | Rolling shutter / Global reset | |
Optical Size | 1/2.8” | |
Cell Size | 2.9 (H) x 2.9 (V) µm | |
Mechanical Spec. | Dimensions | 38 (W) x 38 (H) x 40.0 (D) mm |
Weight | Approximately 47 g | |
Lens mount | C mount | |
Optical filter | Dual pass filter on it | |
Interface connector | RJ45 connector x 1 | |
Power/Signal connector | SM06B-SRSS (JST) x 1 |
Functions | Scanning mode | Full scanning / ROI |
---|---|---|
Operational mode | Edge preset trigger / Pulse width trigger / Free-run |
|
Image pixel format | Mono8 / Mono10 / Mono12 / Mono10Packed / Mono12Packed BayerRG8 / BayerRG10 / BayerRG12 / BayerRG10Packed / BayerRG12Packed RGB8 |
|
Exposure time | 126 µseconds to 999 mseconds | |
Gain (Analog) | 0 to 25.2 dB | |
Gain (Digital) | x1 to x3 | |
Gamma | 0.1 to 4.0 | |
Binning | N/A | |
Decimation | N/A | |
Image flip | Vertical flip / Horizontal flip / Vertical and horizontal flip/ Off |
|
Defective pixel correction | Up to 2,048 pixels | |
Save user settings | Support (Eight settings) | |
White balance | Auto / Manual / Push to set white balance | |
FFC function | N/A | |
Auto control functions | Auto exposure / Auto gain / Auto white balance | |
Chunk function | Support | |
Event function | Support | |
PTP function (IEEE1588) | Support |