STC-MBS1242POE

Back to the list of
CMOS Model M Series>>

STC-MBS1242POE Isometric drawing

Specification sheet

Spec. Model No. STC-MBS1242POE
Resolution 12M
Effective Pixels 4,000 (H) x 3,000 (V)
Monochrome/Color Monochrome
Frame Rate (8bits) 9.2 fps
Interface PoE: IEEE802.3af CLASS2 (1000BASE-T)
Protocol GigE Vision 2.1
Power supply Power Over Ethernet (IEEE802.3af) /
External power (+10.8 to +26.4Vdc)
Power Consumption PoE: Less than 4.1 W
External power: Less than 3.4 W
Operational Temperature Up to +72 deg. C
(Temperature sensor on camera)
Image Sensor Image Sensor SONY IMX226
Shutter type Rolling shutter / Global reset
Optical Size 1/1.7”
Cell Size 1.85 (H) x 1.85 (V) µm
Mechanical Spec. Dimensions 29 (W) x 29 (H) x 53 (D) mm
Weight Approximately 65 g
Lens mount C mount
Optical filter No optical filter
Interface connector RJ45 connector x 1
Power/Signal connector HR10A-7R-6PB (Hirose) or equivalent x 1
Functions Scanning mode Full scanning / ROI
Operational mode Edge preset trigger / Pulse width trigger /
Free-run
Image pixel format Mono8 / Mono10 / Mono12 /
Mono10Packed / Mono12Packed
Exposure time 213 µseconds to 16.777 seconds
Gain (Analog) 0 to 15 dB
Gain (Digital) x1 to x3
Gamma 0.1 to 4.0
Binning N/A
Decimation N/A
Image flip Vertical flip / Off (Not support horizontal flip)
Defective pixel correction Up to 2,048 pixels
Save user settings Support (Eight settings)
White balance N/A
FFC function N/A
Auto control functions Auto exposure / Auto gain
Chunk function Support
Event function Support
PTP function (IEEE1588) Support

Dimensions Drawings

STC-MBS1242POE Dimensions Drawings

Spectrographic Drawings

STC-MBS1242POE Spectrographic Drawings
Contact us

Please call us if you are in a hurry.

046-236-6660

Choosing a Camera
  • Software Downloads
  • Document Downloads
  • FAQ
pagetop