Back to the list of
CMOS Model M Series>>
Spec. | Model No. | STC-MCA503POE-HS |
---|---|---|
Resolution | 5M | |
Effective Pixels | 2,592 (H) x 1,944 (V) | |
Monochrome/Color | Color | |
Frame Rate (8bits) | 21.8 fps | |
Interface | PoE: IEEE802.3af CLASS2 (1000BASE-T) | |
Protocol | GigE Vision 2.1 | |
Power supply | Power Over Ethernet (IEEE802.3af) / External power (+10.8 to +26.4Vdc) |
|
Power Consumption | PoE: Less than 3.6 W External power: Less than 3.0 W |
|
Operational Temperature | Up to +77 deg. C (Temperature sensor on camera) |
|
Image Sensor | Image Sensor | onsemi AR0521 |
Shutter type | Rolling shutter / Global reset | |
Optical Size | 1/2.5” | |
Cell Size | 2.2 (H) x 2.2 (V) μm | |
Mechanical Spec. | Dimensions | 29 (W) x 29 (H) x 53 (D) mm |
Weight | Approximately 62 g | |
Lens mount | C mount | |
Optical filter | IR cut filter on it | |
Interface connector | RJ45 connector x 1 | |
Power/Signal connector | HR10A-7R-6PB (Hirose) or equivalent x 1 |
Functions | Scanning mode | Full scanning / ROI |
---|---|---|
Operational mode | Edge preset trigger / Free-run | |
Image pixel format | Mono8 / Mono10 / Mono12 / Mono10Packed / Mono12Packed BayerRG8 / BayerRG10 / BayerRG12 / BayerRG10Packed / BayerRG12Packed RGB8 |
|
Exposure time | 20.2 µseconds to 1.323 seconds | |
Gain (Analog) | x1 to x15.28 | |
Gain (Digital) | x1 to x3 | |
Gamma | 0.1 to 4.0 | |
Binning | x2 horizontal and vertical individually / x4 horizontal and vertical individually / Off |
|
Decimation | x2 horizontal and vertical individually / x4 horizontal and vertical individually / Off |
|
Image flip | Vertical flip / Horizontal flip / Vertical and horizontal flip/ Off |
|
Defective pixel correction | Up to 4,096 pixels | |
Save user settings | Support (Eight settings) | |
White balance | Auto / Manual / Push to set white balance | |
FFC function | N/A | |
Auto control functions | Auto exposure / Auto gain / Auto white balance | |
Chunk function | Support | |
Event function | Support | |
PTP function (IEEE1588) | Support |