STC-MBE132U3V

Back to the list of
USB 3.0 Model>>

STC-MBE132U3V Isometric drawing

Specification sheet

Spec. Model No. STC-MBE132U3V
Resolution 1.3M
Effective Pixels 1,280 (H) x 1,024 (V)
Monochrome/Color Monochrome
Frame rate (8bits) 60 fps
Interface USB3.0
Protocol USB3 Vision 1.0.1
Power supply USB bus power (+5 V)
Power Consumption Less than 2.0 W
Operational Temperature Up to +40 deg. C
(Environment temperature)
Image Sensor Image Sensor Teledyne e2v EV76C560
Shutter type Global shutter / Rolling shutter
Optical Size 1/1.8”
Cell Size 5.3 (H) x 5.3 (V) µm
Mechanical Spec. Dimensions 28 (W) x 28 (H) x 33.8 (D) mm
Weight Approximately 38 g
Lens mount CS mount
Optical filter No optical filter
Interface connector USB3.0 micro B x 1
Power/Signal connector HR10A-7R-6PB (Hirose) or equivalent x 1
Functions Scanning mode Full scanning / ROI
Operational mode Edge preset trigger / Free-run
Image pixel format Mono8 / Mono10
Exposure time 15.72 µseconds to 1.03 seconds
Gain (Analog) x1 to x3.96
Gain (Digital) x1 to x3.98
Gamma 0.1 to 4.0
Binning x2 horizontal and vertical individually / Off
Decimation x2 horizontal and vertical individually / Off
Image flip Vertical flip / Horizontal flip /
Vertical and horizontal flip / Off
Defective pixel correction Up to 32 pixels
Save user settings Support (Eight settings)
White balance N/A
FFC function N/A
Auto control functions Auto exposure / Auto gain
Chunk function Support
Event function Support
PTP function (IEEE1588) N/A

Dimensions Drawings

STC-MBE132U3V Dimensions Drawings

Spectrographic Drawings

STC-MBE132U3V Spectrographic Drawings
Contact us

Please call us if you are in a hurry.

046-236-6660

Choosing a Camera
  • Software Downloads
  • Document Downloads
  • FAQ