STC-MBS2041U3V
Back to the list of
USB 3.0 Model>>
Specification sheet
| Spec. | Model No. | STC-MBS2041U3V |
|---|---|---|
| Resolution | 20M | |
| Effective Pixels | 5,472(H) x 3,648 (V) | |
| Monochrome/Color | Monochrome | |
| Frame rate (8bits) | 18.5 fps | |
| Interface | USB3.0 | |
| Protocol | USB3 Vision 1.0.1 | |
| Power supply | USB bus power (+5 V) / External power (+8.0 to +24 Vdc) |
|
| Power Consumption | Less than 4.3 W | |
| Operational Temperature | Up to +72 deg. C (Environment temperature) |
|
| Image Sensor | Image Sensor | SONY IMX183 |
| Shutter type | Rolling shutter / Global reset | |
| Optical Size | 1” | |
| Cell Size | 2.40 (H) x 2.40 (V) µm | |
| Mechanical Spec. | Dimensions | 35 (W) x 35 (H) x 41.5 (D) mm |
| Weight | Approximately 77 g | |
| Lens mount | C mount | |
| Optical filter | No optical filter | |
| Interface connector | USB3.0 micro B x 1 | |
| Power/Signal connector | HR10A-7R-6PB (Hirose) or equivalent x 1 |
| Functions | Scanning mode | Full scanning / ROI |
|---|---|---|
| Operational mode | Edge preset trigger / Pulse width trigger / Start stop trigger / Free-run |
|
| Image pixel format | Mono8 / Mono10 / Mono12 / Mono10Packed / Mono12Packed |
|
| Exposure time | 60.58 µseconds to 16.777 seconds | |
| Gain (Analog) | 0 to 22.2 dB | |
| Gain (Digital) | x1 to x2 | |
| Gamma | 0.1 to 4.0 | |
| Binning | N/A | |
| Decimation | N/A | |
| Image flip | Vertical flip / Horizontal flip / Vertical and horizontal flip / Off |
|
| Defective pixel correction | Up to 512 pixels | |
| Save user settings | Support (Eight settings) | |
| White balance | N/A | |
| FFC function | N/A | |
| Auto control functions | Auto exposure / Auto gain | |
| Chunk function | Support | |
| Event function | Support | |
| PTP function (IEEE1588) | N/A |
Dimensions Drawings
Spectrographic Drawings
