STC-S133UVC-BLL

Back to the list of
UVC compatible USB3.0 model>>

STC-S133UVC-BLL Isometric drawing

Specification sheet

Spec. Model No. STC-S133UVC-BLL
Resolution 1.3M
Effective Pixels 1,280 (H) x 720 (V)
Monochrome/Color Color
Frame rate (8bits) 60 fps
Interface USB3.0
Protocol UVC 1.1
Power supply USB bus power (+5 V)
Power Consumption Less than 0.8 W
Operational Temperature Up to +55 deg. C
(Environment temperature)
Image Sensor Image Sensor SONY ISX017
Shutter type Rolling shutter
Optical Size 1/3.2"
Cell Size 3.5 (H) x 3.5 (V) µm
Mechanical Spec. Dimensions 25 (W) x 22 (H) x 24.5 (D) mm
Weight Approximately 13 g
Lens mount S mount
Optical filter IR cut filter on it
Interface connector USB3.0 micro B x 1
Power/Signal connector N/A
Functions Scanning mode Full scanning (1,280x720) /
ROI (1,280x960 / 800x800 / 640x480)
Operational mode Free-run
Image pixel format 8bits
Exposure time 1.65 µseconds to 33.333 mseconds
Gain (Analog) 0 to 40 dB
Gain (Digital) x1 to x4
Gamma Off / Gamma table
Binning N/A
Decimation N/A
Image flip Vertical flip / Horizontal flip /
Vertical and horizontal flip / Off
Defective pixel correction Support
Save user settings Support (One setting)
White balance Auto / Manual / Push to set white balance
FFC function Support
Auto control functions Auto exposure / Auto gain / Auto white balance
Chunk function N/A
Event function N/A
PTP function (IEEE1588) N/A

Dimensions Drawings

STC-S133UVC-BLL Dimensions Drawings

Spectrographic Drawings

STC-S133UVC-BLL Spectrographic Drawings
Contact us

Please call us if you are in a hurry.

046-236-6660

Choosing a Camera
  • Software Downloads
  • Document Downloads
  • FAQ
pagetop