STC-MBS122BU3V

Available Now

Specification Sheet
Dimensions
Spectral Characteristics
Related Documents Downloads
Product Inquiry

SPEC

Specification Sheet

Product
Specifications

Product Model	STC-MBS122BU3V
Camera Type	Area Camera
Resolutions	12MP
Color / Monochrome	Monochrome
Effective Pixels	4,096 (H) x 3,000 (V)
Frame Rate	23.5 fps
Interface	USB3.0
Protocol	USB3 Vision 1.0.1
Power Supply	USB bus power (+5 V) External power (+8.0 to +24 Vdc)
Power Consumptions	Less than 5.1 W
Operational Temperature	Lower limit: 0 deg. C (Environmental temperature) Upper limit: +40 deg. C (Environmental temperature)
Storage Temperature	Lower limit: -30 deg. C (Environmental temperature) Upper limit: +70 deg. C (Environmental temperature)

Image
Sensor

Image Sensor	SONY IMX304
Shutter Type	Global Shutter
Optical Size	1.1"
Cell Size	3.45 (H) x 3.45 (V) µm

Mechanical

Dimensions	35 (W) x 35 (H) x 41.5 (D) mm
Weight	Approximately 78 g
Lens Mount	C Mount
Optical Filter	No optical filter
Interface Connector	USB3.0 micro B x 1
Power / Signal Connector	HR10A-7R-6PB (Hirose) or equivalent x 1

Functions

Scanning Mode	Full scanning / ROI
Operational Mode	Edge preset trigger / Pulse width trigger / Start stop trigger/ Free-run
Image Pixel Format	Mono8 / Mono10 / Mono12 / Mono10Packed / Mono12Packed
Exposure Time	1.5 µseconds to 16,777 seconds
Analog Gain	0 to 19.2 dB
Digital Gain	x1 to x2
Gamma	0.1 to 4.0
Binning	N/A
Decimation	x2 horizontal and vertical individually / Off
Image Flip	Vertical flip / Horizontal flip / Vertical and horizontal flip/ Off
Defective Pixel Correction	Up to 1,080 pixels
Save User Settings	Support (Eight settings)
White Balance	N/A
FFC (Flat Filed Correction) Function	N/A
Auto Control Function	Auto exposure / Auto gain
Chunk Function	Support
Event Function	Support
PTP Function (IEEE1588)	N/A

DIMENSIONS

Dimensions

SPECTROGRAM

Spectral Characteristics

DOWNLOAD

Documents Download Information

This page uses cookies* to enhance user convenience.
When you download materials for the first time, please fill out the required fields in the application form below.
From the second time onward, if you access from the same browser, the input will be skipped and you can download the materials immediately.

The personal information you provide through the form will be used only for the purpose of operating this service, such as providing information about our services.
Your information will be managed securely, so please use this service with confidence.

※A cookie is data temporarily stored by a website in your browser. It allows your settings and input information to be carried over to your next visit.

The storage period of cookies is 180 days.
※Unless you delete the cookies yourself.

If more than 180 days have passed since your last application, you will be required to apply again.

Document Downloads

Datasheets and outline drawings, and other materials for the 【STC-MBS122BU3V】are available for download.
If this is your first time to download materials, you will be redirected to the document download request form.

Software Downloads

Software required to use the product is available for download.

Software Downloads
GigE Vision / USB3 Vision / CoaXPress Cameras (Sentech SDK)
Software Downloads
Factory Drive Recoder

General Catalog Download

General Catalog is available for download.If this is your first time to download materials, you will be redirected to the document download request form.