STC-MCE132POE

Back to the list of
CMOS Model M Series>>

STC-MCE132POE Isometric drawing

Specification sheet

Spec. Model No. STC-MCE132POE
Resolution 1.3M
Effective Pixels 1,280 (H) x 1,024 (V)
Monochrome/Color Color
Frame Rate (8bits) 61.0 fps
Interface PoE: IEEE802.3af CLASS2 (1000BASE-T)
Protocol GigE Vision 2.1
Power supply Power Over Ethernet (IEEE802.3af) /
External power (+10.8 to +26.4Vdc)
Power Consumption PoE: Less than 3.7 W
External power: Less than 3.1 W
Operational Temperature Up to +65 deg. C
(Temperature sensor on camera)
Image Sensor Image Sensor Teledyne e2V EV76C560
Shutter type Global shutter / Rolling shutter
Optical Size 1/1.8”
Cell Size 5.3 (H) x 5.3 (V) µm
Mechanical Spec. Dimensions 29 (W) x 29 (H) x 53 (D) mm
Weight Approximately 63 g
Lens mount C mount
Optical filter IR cut filter on it
Interface connector RJ45 connector x 1
Power/Signal connector HR10A-7R-6PB (Hirose) or equivalent x 1
Functions Scanning mode Full scanning / ROI
Operational mode Edge preset trigger / Free-run
Image pixel format Mono8 / Mono10 / Mono10Packed
BayerBG8 / BayerBG10 / BayerBG10Packed
RGB8
Exposure time 10 µseconds to 1 seconds
Gain (Analog) x1 to x2
Gain (Digital) x1 to x3
Gamma 0.1 to 4.0
Binning x2 horizontal and vertical simultaneously / Off
Decimation x2 horizontal and vertical individually /
x4 horizontal and vertical individually / Off
Image flip Vertical flip / Horizontal flip /
Vertical and horizontal flip/ Off
Defective pixel correction Up to 2,048 pixels
Save user settings Support (Eight settings)
White balance Auto / Manual / Push to set white balance
FFC function N/A
Auto control functions Auto exposure / Auto gain / Auto white balance
Chunk function Support
Event function Support
PTP function (IEEE1588) Support

Dimensions Drawings

STC-MCE132POE Dimensions Drawings

Spectrographic Drawings

STC-MCE132POE Spectrographic Drawings
Contact us

Please call us if you are in a hurry.

046-236-6660

Choosing a Camera
  • Software Downloads
  • Document Downloads
  • FAQ
pagetop