SENTECH

FAQ

FAQ Categories

Sentech SDK

Which image acquisition software is available for USB3 Vision cameras?
Is there any Sentech SDK sample code available for drawing functions?
In Sentech SDK and StViewer, what are the differences between the types of camera parameters?
When building or running a program using SentechSDK (.NET) with .NET Framework 4.0 or later, I get the error:
“The mixed mode assembly was built against version ‘v2.0.50727’ of the runtime and cannot be loaded in the 4.0 runtime without additional configuration information.”
What’s the difference between the Sentech SDK “Grab” and “GrabCallback” sample codes?
Is there a way to connect to a specific camera using Sentech SDK?
Is there sample code to use images acquired with Sentech SDK in OpenCV?
Is there Sentech SDK sample code for edge enhancement (sharpness) processing?
I’m new to Sentech SDK. Which sample codes should I start with for image acquisition and camera settings?
What camera drivers are included in the Sentech SDK?
Is there a Sentech SDK sample code for changing camera settings?
After running sample code from the Sentech SDK, StViewer or other sample programs can no longer acquire images.
Is there a common software or SDK that can be used with both USB3 Vision and GigE Vision cameras?
My program created with the SDK cannot acquire images.
How do I install Sentech SDK (v1.1.1 or later)?
Which IDEs can be used with the Sentech SDK for Python development?
Is there a sample program to adjust camera parameters such as exposure time and gain?
Where can I find the sample programs included in the Sentech SDK?
Where can I find the Sentech SDK DLL files?
Does the Sentech SDK support Python?
I cannot install the Sentech SDK Package on an English version of Windows OS.

StViewer

How can I save images in StViewer with a specified bit depth (8bits, 10bits, 12bits)?
In Sentech SDK and StViewer, what are the differences between the types of camera parameters?
In StViewer, only part of the image is displayed.
Can I zoom in and out on captured images in StViewer?
Can I change the display units in the drawing function of StViewer?
How can I save images with drawing data in StViewer?
Can I use the drawing function in StViewer?
Which sample program should I start with when using the Sentech SDK?
Can I acquire images from multiple cameras in a single StViewer window?
I saved settings to UserSet in StViewer, but they are not stored in the camera.
Why does the error “File StGenTL.cti not valid” appear when starting StViewer?
What is the unit of shutter speed (exposure time) setting in StViewer?
How can I save videos in StViewer?
How can I check the camera name, firmware version, and other details in StViewer?
How can I set the exposure time in StViewer?
I reduced the resolution using ROI in StViewer, but the frame rate did not increase.
How can I restore the camera settings to the factory default (initial state)?
How can I check the frame rate in StViewer?
How can I save and load camera settings in StViewer?

Software

Can I perform simple measurements using the drawing function in StCamSWare?
What is the procedure to confirm the frame rate in StCamSWare?
Is it possible to zoom in or out on captured images with StCamSWare?
“What is the procedure to save images with drawing data in StCamSWare?
What should be noted when saving video with StCamSWare?
What is the procedure for saving images with the capture function in StCamSWare?
Is there a drawing feature in StCamSWare that allows lines or other objects to be drawn on the image?
What is the procedure for saving USB3 Vision camera settings in StCamSWare?
Which image acquisition software is available for USB3 Vision cameras?
Which image acquisition software is available for USB3 Vision cameras?

Camera Settings

The images captured with a USB3 Vision/GigE Vision color camera appear greenish. What should I do?
What is the difference between a software trigger and a hardware trigger?
Why does the image become darker when I lower the resolution?

Camera Operating Environment and Peripheral Equipment

What should be noted when operating a USB3 Vision camera?
The USB camera is not displayed in StViewer.
Is it possible to use a USB 3.0 camera with a USB 3.1 port?
Which cables are recommended for use with USB3 Vision cameras?
What are the methods of power supply for USB3 Vision cameras?
Why is the size of the image data captured with a color camera the same as that captured with a monochrome camera?

Contact

For any questions about our products and services,
including specifications and technical support, please feel free to contact us.

Headquarters,
Sales Department+81 46236-6660

Technical support request

Newsletter Subscription

Stay up-to-date with our latest news, including new product releases,
information on discontinued products, and upcoming trade shows.

How to Choose a Camera
FAQ