Communication software installation is required:
Please download “KPACtrl” software from software download then execute install file.

Driver of communication tool installation:
The driver files for communication tool copy to PC when installing KPACtrl software.
When connecting JIG-USB-HD communication tool to PC first time, it is necessary to apply USB virtual serial driver for communication.
The driver files of USB virtual serial driver copy to “Sentech\KPACtrl\drv”
“Sentech USB Serial Port driver” installs automatically when connecting JIG-USB-HD to PC after installed driver for USB virtual serial driver.
Please confirms COM number of USB Serial Port at Device maneger on Windows.
Runs KPACtrl communication software.
Selects “Port Setting” under “Comm” on menu then sets COM number for communication, which is comfirmed COM number at Device Manager.
Please checks informaiton of error code when displaying error code while communication.

The camera settings can go back to factory default settings with OSD by external controller or communication.

To go back to factory default settings with OSD
1. Connects the external controller to camera then selects “Menu” button of external controller.
2. Selects “RESET” at “EEPROM” on OSD PAGE6.
Selects “OK” or “Enter” button of external controller when displaying “Are You OK?” then camera settings go back to factory default settings.
When power off and on camera after this procedure, camera power on with factory default settings.

To go back to factory default settings for 4K camera with KPACtrl communication softawre.
1. Connects JIG-USB-HD communication controller to camera then runs “KPACtrl” communicaiton software.
2. Selects “Read ALL” then read out camera settings from camera.
3. Selects “DSP:Shutter/Gain” tab.
4. Selects “Disable” at “ALC mode”.
5. Selects “Fixed Gain” at “Gain control” then change fixed gain value at “Gain value”.

DSP: Controls camera parameter for image.
Controls exposure time, gain, white balance, hue and color satulation, line maker and flip image parameters.
Eight sets of “DSP” camera parameters are adjustable and savable.

uCOM: Controls camera prameter for other function of camera.
Controls push button function, user defined color, size of OSD and test patterns.
“uCOM” camera parameters are common parameters for all “DPS” parameters sets.

4K/HDMI cameras have flip image function.
The flip image function is controlable with OSD and KPACtrl/JTBCtrl communication software.

To change flip image with OSD
1. Connects the external controller to camera then selects “Menu” button of external controller.
2. Selects “STANDARD”, “HV INVERSION”, “V INVERSION” or “H INVERSION” at “IMAGE OUTPUT” on OSD PAGE5.
“STANDARD”: Original image
“HV INVERSION”: Horizontal and vertical flip image
“V INVERSION”: Vertical flip image
“H INVERSION”: Horizontal flip image

To change flip image with KPACtrl for 4K camrea
1. Connects JIG-USB-HD communication controller to camera then runs “KPACtrl” communicaiton software.
2. Selects “Read ALL” then read out camera settings from camera.
3. Selects “DSP:Other” tab.
4. Selects “On” at “Hrizontal flip” or “Vertical flip” then flip image is displaying.
When selects “On” at “Horizontal flip” and “Vertical flip” then horizontal and vertical flip image is displaying.