The size of image/resolution and frame rate are different based on selected camera operation mode.
Please selects from “Mode7” to “Mode10” at “Image Mode” under “Image Format Control” on “Remote Device” to achieve 1,000fps. (Please refers specifications for details of operation mode)

* When selecting “Mode7” to “Mode10”, image sensor output becomes 4bits and convert to 8bits on FPGA.
* The maximum frame rate with “Mode10” is 2,000fps.
* When selecting “Mode7” to “Mode10”, 1,000fps frame rate can achieve, but actual frame rate could be less than 1,000fps depends on PC environment (peformance of USB3.0 host controller).

Please contact us about viewing software for check sensing function.
Sentech SDK installation is required to use viewing software to check sensing function.

STC-MBV133U3V and STC-MCV133U3V do not support external/hardware trigger.
Please use software trigger if trigger function is need for STC-MxV133U3V camera.

The variable frame rate cannot set to STC-MxV133U3V camera.
The frame rate of STC-MxV133U3V is defined by camera operation mode.
Please refers specifications of STC-MxV133U3V.