We provide “SentechSDK Package”. SentechSDK Package includes Viewer software “StViewer”.
If already use GigE Vision camera, also eBUS SDK or StGigE-Package can use with GigE Vision camera.
Please download the software from GigE Vision Software download
 
Also GigE Vision camera uses with GigE Vision interface supported Vision software.

Usually, the image acquisition software from Opt-C:Link board manufacture or Vision software use for Opt-C:Link camera.
We do not provide any image acquisition software for Opt-C:Link camera.
We provide the camera setup software (CLCtrl2) that allow to change exposure time, operating mode and other camera settings.

VGA to 5M CCD based GigE Vision cameras and 0.4M to 12M CMOS based GigE Vision cameras are available.
 
Please refer below linked page for details of GigE Vision cameras.
    GigE Vision camera information
 
* GigE Vision camera does not include lens, Ethernet cable and power adapter.
  Please refer accessories for GigE Vision camera, cable manufacture website and lens manufacture website to select accessories.

The recommend interface camera is different based on how does the image acquire. (with PC or without PC)
 
When the image acquiring with PC
    When the image acquiring without frame grabber board
       GigE Vision supports up to 100m cable.
       USB3 Vision can use with USB bus power to achieve one cable solution.
       USB2.0 can use with USB bus power to achieve one cable solution.
 
    When the more stable image acquiring with frame grabber board
       Camera Link is available from “Low resolution / high speed” camera to “high resolution / high speed” cameras.
       CoaXPress can be faster frame rate compare with same resolution of Camera Link camera.
       Opt-C:Link supports up to 100m cable.
 
When the image displaying without PC (camera connects to monitor directly)
       HD-DVI can be connect to monitor directly with HDMI cable.
       3G-SDI / HD-SDI can be connect to SDI supported monitor directly with BNC cable.
       TV format can be connect to monitor directly with BNC cable.

Usually, the image acquisition software from Camera Link board manufacture or Vision software use for Camera Link camera.
We do not provide any image acquisition software for Camera Link camera.
We provide the camera setup software (CLCtrl2) that allow to change exposure time, operating mode and other camera settings.
 
We’ve confirmed the Camera Link board and acquisition software connectivity in below chart.

We provide “SentechSDK Package”. SentechSDK Package includes Viewer software “StViewer”.
Please download the software from CoaXPress Software download

We provide “SentechSDK Package”. SentechSDK Package includes Viewer software “StViewer”.
When using USB3 Vision camera and “USB2.0 or USB3.0 camera” in same system,
please use “StCamUSBPack” software for Windows environment, “V4L2 USB driver” for Linux environment.
Please download the software from USB Software download
 
Also USB3Vision camera uses with USB3 Vision interface supported Vision software.

0.4M to 12M CMOS based USB3 Vision cameras are available.
 
Please refer below linked page for details of USB3 Vision cameras.
    USB3 Vision camera information
 
* USB3 Vision camera does not include lens and USB cable.
  Please refer accessories for USB camera, cable manufacture website and lens manufacture website to select accessories.

Camera Link camera power is supplying by external power supply through 6pin connector, or PoCL (Power over Camera Link) through Camera Link cable.
PoE power supply equipment, which is PoE support Gigabit Ethernet switching HUB, PoE injector or other, is required for PoE.

USB2.0 camera power is supplying from USB port on PC through USB cable.